RHUB TM-270 Manual do Utilizador descarregar pdf (Página 3)

1. Installation & Registration

The Web conferencing server package includes:

 TM-200, TM-260, TS-300, TM-510, TM-560, TM-600 TM-800, TM-1000, or TS-700

appliance (or server)

 Analog console cable

 Power cord. Power brick (for TM-200, TS-300, TM-260, TM-250E, and TM-550 only)

1.1. Accessing your RHUB Web Conferencing Appliance

There are two ways to access the TM-200 and TM-260 appliances: by using plug-and-play or by

using a direct cable connect. To access the TM-510, TM-560, TM-600, TM-800, TM-1000, TS-300

and TS-700 appliances, use plug-and-play. In all cases, an Internet browser needs to be used to

access and configure the server.

I. Plug-and-Play

This method requires that you have:

 A DHCP server on your network

 A computer with Microsoft Windows (2000, XP, Vista, Windows 7, or Windows 8)

It is important to follow the instructions below to start the server for initial setup:

1. Connect the server with an Ethernet cable (not a crossover cable) to your network

2. Plug in the power cord to automatically power on the server

3. Wait for the ready light to turn green. This usually takes about 30 seconds.

Open a browser on your computer and type “http://myonlinemeeting”. The following page should

appear:

Figure 1.1 Home Page

1 2 3 4 5 6 7 8 ... 32 33

Sem comentários

RHUB TM-270 Manual do Utilizador Página 3