RHUB TM-270 Manual do Utilizador descarregar pdf (Página 5)

 Disconnect your computer from any network including the wireless

 Power on the TM-200 or TM-260 (as described above)

 Wait for the ready light to turn green. This usually takes about 90 seconds

 Connect the TM-200 or TM-260 to your computer using the included crossover-cable or

any Internet cable

 On your computer, open a browser and in the address bar type http://192.168.1.192.

The home page (Figure 1.1) should display.

 Because your appliance is not connected to the Internet, when you click the link “Web

Conferencing Server Management”, the registration page (Figure 1.3) will not display. To

bypass the registration page, type http://192.168.1.192/as/wapi/login?b=y.

Once you have accessed the meeting server, you are ready to configure the server. Do not

disconnect your computer from the meeting server before you complete the configuration

described in the next section. After the configuration, connect the TM-200 or TM-260 to your

network using a regular Ethernet cable (which is not included).

Note that after you change the system IP settings, the web page will hang. You will need to use

the new IP address to access the appliance.

1.2 Registering your RHUB Web Conferencing Appliance

When you receive your RHUB appliance, you have to register in order to receive software

updates and technical support. To register your appliance, access the meeting server home page

(Figure 1.1), and click the “Web Conferencing Server Management” link. The Registration Page

(Figure 1.3) appears. If you are using the direct-cable connection method to access your

appliance (Section 1.1, Part III), type http://192.168.1.192/as/wapi/login?b=y to bypass the

registration page since the appliance is not connected to the internet yet.

It is important to specify an email address that will last a long time to insure that you receive

important notices such as product release notes from the manufacturer.

Figure 1.3 Registration Page

1 2 3 4 5 6 7 8 9 10 ... 32 33

Sem comentários

RHUB TM-270 Manual do Utilizador Página 5